top of page
Changtong Telecom Co. LTD.
Check and Repaire Service
✔ Comprehensive inspection and repair services for various switches, lines, connectors, contacts, telecommunications boxes, power supplies, etc.
✔ All kinds of special tools, quickly detect problems, test correctly.
✔ Software & hardware knowledge, we find the cause of the problem.
✔ Rich experience to solve any problem.
Wiring
Cabling is one of the most important tasks supporting our infrastructure.
If this is not done correctly, the equipment you prepare will not function properly. The cable may be covered with a jacket, but the wire inside is very fragile and can break easily if bent or pulled too much. Pull as straight as possible and use as many anchor points as possible to distribute the weight.
Additionally, the cables are protected in tubes for harsh environments. Mark the cables to see where the wires are connected later.
We support all kinds of cable runs, from indoor power lines, telephone lines, network cables, to optical fibers over 100m long and thick HDMI cables.
No matter how difficult the situation is, leave it to us.
For example, even if it is difficult to pass the cable through the pipe, you can use soapy water to smooth it out, or use a tool to pull it or push and pull it repeatedly to get it through.
After the wiring is completed, plug in the connector, use a special tool to check the cable, and test it to see if it is normal.
Wiring is our experience and will be helpful to you.
cabling
Installation
We can handle the installation, relocation, and removal of equipment that requires cabling (telephone switches, network equipment, etc.), difficult to install locations, or large equipment that is difficult for a single person to install.
Rack installation includes cabling, and the key is how to keep it neat and orderly in a small space. If it is neat and easy to see, future maintenance will be easier.
It is also important to leave enough cord length to easily remove the machine.
When installing at high places or installing large equipment, choose screws of various lengths, sizes, shapes, etc. according to the materials such as hard cement, pillars, and soft wood walls.
If necessary, it can be suspended or wall-mounted anywhere using an auxiliary arm or auxiliary plate.
Depending on the situation, we use multiple of our personnel to perform the work safely.
install
Operation Settings
Even if users prepare their own equipment, we help set up the operation.
We are also proficient in software, which allows us to set up operations more accurately and smoothly.
For the operating settings of each machine, unless it is used on a daily basis, you should check the manual or ask the manufacturer directly.
However, the process may still take some time.
To avoid this, it is important to understand the device software architecture. This is especially useful when a machine fails.
If you are not familiar with the machine and it does not work properly, you may think it is a malfunction, but it may be caused by a problem with the machine software or insufficient resources such as the CPU, for example, if there are too many people using the machine.
In this case, you may be able to resolve the issue by updating your software or changing your settings.
We also support devices that require advanced configuration, such as firewalls, VPN routers, NAS, computer data transfer and backup systems, door lock management software, etc.
settings
Chaxiu
With our 40 years of knowledge and experience, as well as our dedicated tools, we will identify and solve any problems, rather than ignoring them.
Many telephone systems, network equipment, and surveillance access control systems involve wiring, so the cables must be checked.
Even in equipment we don't have installed, we find wiring and check for damage to connection points or broken cables.
If there is a problem with a connection point or cable, it can be repaired on the spot.
Checking the machine itself includes not only turning on the power, confirming startup, and testing operation, but also checking the system log inside the device to find the cause as needed.
Even if it is a problem with the machine, it can be sent to a repair shop. Of course, it can also be replaced with a new machine.
We may also loan you a spare machine while you wait for repairs or a new device.
maintenace
bottom of page